If your 2027 budget has a line for a new security system with a question mark beside it, the question behind it sounds simple: the system is getting old, so do we replace it or upgrade it?
That’s hard to answer, because a security system is a stack of parts: cable in the walls, locks and sensors on the doors, card readers and the cards people carry, cameras, a recorder or a cloud service, an alarm panel and the communicator that reports it, and the software that ties them together. Those parts were often installed in different years, and they age at different rates. The age of the oldest part tells you very little about the rest.
So before a number goes into the budget, ask four questions of each part.
Replace or upgrade: the four questions
- Does it still get updates? If a part that connects to a network no longer gets updates from its maker, no fix is coming for the next problem someone finds in it.
- Can it meet today’s password test? A device that can’t take a strong password is hard to secure, no matter how well it records.
- Does it follow an open standard? If it does, the next part you buy has a better chance of working with it.
- Does it still do the job you need? A camera can work perfectly and watch a door nobody uses anymore.
The first two questions only apply to parts that run software and connect to a network. Cable and mechanical door hardware don’t take updates or passwords; for them, the questions are condition and fit.
Where each part usually stands
| Part | What usually decides it | Who can answer |
|---|---|---|
| Cable in the walls | Its condition, and whether it suits the device that will use it | Your installer, by testing it |
| Locks, strikes, and door sensors | Whether each door still closes, latches, and reports correctly | Whoever manages access, on a walk of the doors |
| Card readers and cards | The connection to the access panel, and the type of card | Your security provider |
| Cameras | IP cameras: updates, passwords, and open standards. Analog cameras: what the recorder needs | Your security provider |
| Recorder or server | The support dates for the software it runs | Your security provider and your IT team |
| Alarm panel and communicator | Support, and the network the communicator uses | Your alarm company or monitoring center |
| Cloud services and other subscriptions | Renewal dates, and what each one covers | Your agreement, or your provider |
Question 1: does it still get updates?
For every part that connects to a network, find out who made it, what software or firmware it runs, and whether the maker still publishes updates for it. Write down any end-of-support date; it often matters more to the budget than the system’s age. As I wrote in the camera cybersecurity post, equipment its maker has stopped supporting should be replaced, and the recorder end of support post covers when a supported path can keep the hardware you own.
Two Microsoft dates belong in this conversation. According to Microsoft’s end of support notice, recorders built on the 2016 long-term release of Windows 10 got their final monthly security update on October 13, 2026, and Windows Server 2016 is scheduled to get its last on January 12, 2027. The same notice says extended security updates are sold for up to three years (for recorders, only through the recorder’s maker), and calls them a temporary bridge. Which path fits is for your IT team and security provider to decide together; for the budget, what matters is knowing which machines are on the list.
Question 2: can it meet today’s password test?
The federal Cybersecurity and Infrastructure Security Agency publishes cybersecurity performance goals that make a plain test. They call for changing the maker’s default password before equipment connects to any network, and for passwords of 16 or more characters where the equipment can support them. Where it can’t, they allow other safeguards in the meantime and say this: “Assets that cannot support passwords of sufficient strength are prioritized for upgrade or replacement.”
Ask your provider whether each camera and recorder, and any panel or door controller with a network login, can take a password that long. A device that fails that test belongs near the top of the plan, even if its picture is still sharp. While you’re asking, find out whether each person who uses the system has their own login; shared logins are a separate fix, and often just a settings change.
One thing to be clear about: how your security equipment connects to your network is your IT team’s decision. Verified doesn’t sell IT or network services. Whoever your security provider is should tell your IT team exactly what each device needs.
Question 3: does it follow an open standard?
Open standards make it easier to replace one part without replacing the parts around it.
Cameras. IP cameras connect to your network, usually over a network cable; analog cameras run on coaxial cable straight to a recorder. Your security provider can tell you which you have. Many IP cameras follow standards from ONVIF, an industry body for video and access control equipment. As I wrote in the cloud video post, IP cameras that follow ONVIF usually carry over to a new recorder or cloud platform. Analog cameras were never built to speak that language, so they carry over only if the new recorder can still take them. ONVIF’s conformant products database says conformance is tied to a specific firmware version, and the camera’s firmware has to match the version listed. So check the firmware version as well as the model.
If your cameras are analog, ask whether a new recorder can work with the cameras and cable you have, or whether they change together.
Card readers and cards. For decades, most readers have talked to the access panel over an older connection called Wiegand, which sends its data unencrypted. The newer one is OSDP, the Open Supervised Device Protocol, an international standard since 2020. The Security Industry Association, which manages it, says on its OSDP page that its Secure Channel mode supports the encryption required in federal government applications, and that its connections show when a reader malfunctions.
OSDP protects the wire between the reader and the panel. It doesn’t protect the card. The mobile access control post explains why the classic white 125 kHz proximity card, still common on older systems, is the weak spot. So ask what cards you use, and plan readers and cards together. The locks and door sensors on the same doors may be fine to keep.
Question 4: does it still do the job you need?
A part can pass every technical question and still be the wrong part: the camera on the old loading door, the reader on an entrance that changed jobs, the motion sensor in a room that’s now storage. The building changes post walks through how to find those spots. Sometimes the fix is simply moving a camera.
Ask what your alarm talks over
The alarm panel gets the same questions, plus one for its communicator, which sends alarms to your monitoring center over a phone line, a cellular network, the internet, or more than one of those. Is it on a network that still carries its signal?
You don’t need to open anything to find out. Ask your alarm company or monitoring center which path your communicator uses and when it last checked in, and whether the communicator can be replaced without the panel. Those answers keep a network change from turning into a new system by default.
Turn the answers into a budget
Put the answers on one page. List each part, and give it one of three decisions:
- Keep. It passes the questions that apply to it. For cable and door hardware, that means good condition and a good fit.
- Put first. It connects to a network and no longer gets updates, with no supported path from its maker, or it fails the password test.
- Plan for a date. It works today but has a known end-of-support date, doesn’t follow a standard the next part will need, or no longer fits the job.
A page like that puts the money where the risk is first, lets you spread the work across budget years when the dates allow, and gives you a list any security company can quote against, so two proposals can be compared part by part.
The page may still add up to a full replacement. If it does, you’ll know why, one part at a time.
If you’d like a part-by-part read on your system before you commit to a replacement, we’d love to talk. Call Verified Security at 678-924-7480 or contact the team.
Frequently Asked Questions
How long does a business security system last?
There is no single number, because the parts age at different rates. Cable and door hardware last as long as their condition holds, while cameras, recorders, panels, and software are limited by how long their makers support them.
Can I keep my cameras if I replace the recorder or move to the cloud?
Often, if they are IP cameras that follow an ONVIF profile the new system supports, with firmware matching the version in ONVIF’s database. Analog cameras usually change with the recorder.
Can I spread a security system upgrade across more than one year?
Often, yes. Put networked parts with no supported path from their maker, and parts that fail the password test, at the top of the list, then schedule the rest by their end-of-support dates. A part-by-part list also lets two security companies quote the same work.
Do I have to replace my card readers to upgrade access control?
Not always. Readers on the older Wiegand connection send their data unencrypted, while the newer OSDP standard supports encryption. Ask whether your panel supports OSDP, whether your cards should change too, and whether the locks and door sensors can stay.
Current as of November 2026.
Scott Hightower founded Verified Security in 2007 and has spent nearly two decades designing, installing, and servicing commercial security systems across metro Atlanta. Verified Security specializes in access control, video surveillance, and intrusion systems. Reach Scott’s team at 678-924-7480.



